Cooling Heat Loss Energy Calculators     
Topics & Tools

Section: Heating  
Featured Calculators

Heat Loss Online™ Calculator Version 2.0

Calculate Energy Savings

Size Your Humidifier

Calculate Fuel Savings Thermostat Set-back

Save Energy with Attic Insulation

Heating Systems

Heating Systems
  Q & A
Maintenance Tips


Self contained or ptu’s (packaged terminal units) are labeled as such because all of the machinery, (condenser, furnace, evaporator coil, and blower) is contained in one large cabinet. The most common are the rooftop units. Heating only, cooling only, or heating and cooling can be obtained from these machines. Some manufactures design them with interchangeable panels that allow ductwork to be attached to the bottom for rooftop applications or to the sides for outdoor location of the unit and through the wall ductwork.

Heat can be from any fuel (gas, oil, electricity, or heat pump), and air conditioning will be electric. Designed originally for commercial applications, their versatility has created a demand for residential use; and smaller, quieter machines are produced for the home. With the help of a fresh air hood and enthalpy controls, air conditioning demands can be met when outdoor air temperatures are low by means of drawing fresh air in and ducting it to the space, reducing the demand for electricity by keeping the compressor idle. As the air temperature rises, the enthalpy control will mix fresh air with re-circulated air as it turns the compressor on for needed cooling.

Rooftop installations that are ducted out of the bottom require a curb, which not only raises the unit up off the roof but has framework to support and fasten the ductwork to.

The heat loss and gain calculator in this site can be used to size a unit, but in commercial applications other major factors such as lighting, fresh air, delivery doors, and machinery operating within the space are critical, and therefore not recommended.

Heating   Cooling   Air Quality   Home